Ccr series rotating drum cabins

The CCR washer is designed for spray-cleaning mechanical parts to remove oily residue, any visible residue, or other contaminants. When treating steel parts, they must be protected from the risk of oxidation after treatment with aqueous solutions using a suitable product. The washing machine is equipped with a drum that rotates on its horizontal axis via a gearmotor, with spray ramps on the side, to completely degrease the parts being treated.

WASHING CYCLE AND DESCRIPTION OF STAGES:

  1. Inserting the basket into the rotating drum,
  2. Washing by spraying with hot solution,
  3. Drainage and dripping
  4. 1Blowing with compressed air
  5. Devaporization
  6. 2Drying with hot air knife
  7. Basket extraction.

1= cycle phase present only if the optional “Compressed air blowing” has been purchased.
2= cycle phase present only if the optional “Hot air drying” has been purchased.

Technical data/modelCCR 30CCR 120CCR 320CCR 640
Dim. Basket L x H x D (mm)300 x 460 x 200400 x 700 x 400600 x 900 x 600800 x 1000 x 800
Drum rotationHorizontal axisHorizontal axisHorizontal axisHorizontal axis
Wash typeSpraySpraySpraySpray
No. Hot tanks1111
Useful flow rate (Kg)100150200150
Washing pressure (bar)54.54.54.5
Pump power (Kw)245.55.5
Pump flow rate (lt/min.)150215300300
No. ramps2222
Wash tank capacity375550750825
Intake flow rate vapors (m3/h)900112516002200
Electric heating (Kw)12152424
External overall dimensions (mm)L 1800
P 1650 H 2500		L 1900 P 2350 H 2600L 2100 P 2550 H 2700L 2300 P 2650 H 2750
Drum position sensorStandardStandardStandardStandard
Construction materialAISI304AISI304AISI304AISI304
CasingMethacrylate/AlMethacrylate/AlMethacrylate/AlMethacrylate/Al

The CCR models are available in the -2 series with rinsing and drying and also for hydrokinetic washing in the CCR-I series.