Washing
For further information regarding the used equipment listed below, please do not hesitate to contact us on 0423 720588 or at the email address commerciale@ultratechgroup.it.
ULTRASONIC TANK
Ultrasonic tank measuring 350 x 650 x 500 mm (height) with a load capacity of 100 kg and a filling volume of 135 litres.
Ultrasonic power 1200 watts with frequency 24 kHz, submersible transducers, hinged lid.
ULTRASONIC TANK
Internal dimensions: 550x380x450 h. mm.
External dimensions: 780x530x1000 h. mm.
Ultrasound power 1200 watts
ULTRASONIC DEGREASER
Ultrasonic degreaser MOD. 2S40, tank dimensions 300 x 450 x 300 mm
AUTOMATIC SOLVENT DEGREASER
The MS150 system is designed for solvent washing by means of ultrasonic immersion and is equipped with an automatic control system.
The system consists of:
- 02 loading/unloading roller conveyors with a capacity of 05 baskets each,
- 01 solvent degreaser complete with upper fairing,
- 02 automatic conveyors for handling baskets,
- 10 wastepaper basket holders,
- 01 solvent distillation plant,
- 01 refrigeration system,
- 01 electrical panel with Siemens/Omron PLC and touch-screen operator panel.
The overall dimensions are 7,300 x 2,250 x 3,930 mm (height) and the useful dimensions of the tanks are 700 x 400 x 250 mm (height).
There are two 2200/4400 watt generators and four flanged transducers, each rated at 1100/2200 watts.
The washing cycle is as follows:
- Load,
- Ultrasonic immersion washing,
- Ultrasonic immersion washing,
- Spray washing,
- Rinsing in the steam phase,
- Condensation drying,
- Deodorisation,
- Exhaust.
TWO-STAGE DEGREASER
WASHING TUNNEL
The TU 2000/3 tunnel is designed to perform ultrasonic washing, spray rinsing and drying.
The tunnel consists of an ultrasonic section, a buffer tank, a spray section, a drying section and an automatic emptying circuit.
Length of ultrasonic washing section 1000 mm, length of spray rinsing section 300 mm, length of drying section 300 mm.
Overall dimensions: 2200 x 1000 x 1500 mm (height).
The washing cycle is as follows:
- hot ultrasonic cleaning
- drainage
- partial replacement rinsing
- drying
- compressed air blowing
LINEA DI LAVAGGIO E ASCIUGATURA
The modular system 400-8 plant is designed for drying and is equipped with an automatic basket handling system. The plant consists of an ultrasonic washing tank, a rinsing tank, a rinsing module designed for heating, and a 4-position drying oven.
Useful dimensions of treatment tanks: 400 x 1000 x 1000 h. mm., ultrasonic output power 2500/5200 watts.
The washing cycle is as follows:
- load
- ultrasonic pre-wash with agitation
- recovery
- double cascade rinse
- blow moulding
- hot air drying
- exhaust
WASHING SYSTEM + ULTRASONIC WASHING MACHINE
Internal dimensions of ultrasonic washing machine: 350 x 300 x 300 h. mm.
External dimensions of ultrasonic washing machine: 650 x 560 x 1000 h. mm.
