The oven allows the paint drying of the piece with a continuous recycle of air.
The air is heated by a heat exchanger (with electric finned resistances or gas burner)placed on the lateral wall.
The recycle air is conveyed by a special electro-blowing fan for high temperatures with motor placed outside the oven. The temperature control is made by digital thermoregulator placed on the electric board and by air probe inside the oven.
The oven has also a safety thermostat for the overheating of electric resistances and a timer to delay the stopping of the ventilation, in order to let the resistances to cool after the heating stopping.
The oven is built with sandwich panels, in aluzink steel, insulated with mineral wool thickness 150 mm. density 100 kg./m3.
The oven is provided with butterfly valve for vapour expulsion and frontal manual door. The door will be suitably insulated and equipped with double hermetic seal, with gasket for high temperature, and with anti-panic release closing.
The bottom of the oven is insulated with aluzink steel sheet panels, bended and welded, with mineral wool for the insulation.
The electrical cabinet is placed on the right side with control and signalling devices placed outside the door.
The noisiness level during the work cycle is lower than 80 dBA.
Our ovens are built in according of the UNI EN UNI EN 1539:2010 – Dryers and ovens, in which flammable substances are released.